Skip to content

MSI H61M-P20W8 MS-7788 BIOS (REV 3.0, 4 MB)

BIOS MS-7788 Added: Jun 17, 2020 RAR · 2.8 MB

File details

TypeBIOS
BrandMSI
ModelH61M-P20W8
Board numberMS-7788
Board maker (ODM)MSI
Revision3.0
DeviceDesktop motherboard
FormatRAR
Size2.8 MB
BIOS chip size4 MB
AddedJune 17, 2020
Updated
Original file nameBIOS MSI H61M-P20W8 H61M-P21(B3) MS-7788 VER. 3.0 4MB.rar

Where to get the file

Opens the matching file on RM Schematics, or its source details if it is not catalogued there yet.

Alternative links

No other copies are known yet.

AwesomeHeader does not store this file. It was published in a public Telegram channel; the links above lead to the original post and its copies.

Description

BIOS dump for the MSI H61M-P20W8 desktop motherboard, board number MS-7788, revision 3.0, supplied for a 4 MB flash chip. Technicians use a dump like this to reprogram the SPI chip with a programmer after a corrupted BIOS or a failed update. Before flashing, confirm that the board number and revision on your board match the file, and save a backup of the original chip contents first. The archive is a RAR file of about 2.8 MB, and the original file name refers to the H61M-P21(B3) as well.

For board MS-7788 the catalog also has 3 schematics, 2 boardview files, and 7 BIOS dumps.

Description generated from the catalog data. ·

How to open it

A BIOS dump is written to the SPI flash chip with a programmer such as the CH341A and a SOIC8 clip. Read and save the original chip contents twice before writing.

Guide: Flash a Laptop BIOS with a CH341A Programmer →

Browse more

Questions about this file

How do I flash this BIOS dump?

Write it to the SPI flash chip with a programmer such as the CH341A and a SOIC8 clip. Read and keep the original contents first, and check that the chip size matches the dump.

Will this BIOS work on my board?

Only if the board number and revision match: MSI H61M-P20W8 MS-7788. Dumps from a different board or revision can leave the board dead.

What does “clean ME” mean?

The Intel ME region in the dump has been reset, so it can be used on another board of the same model. Keep your original dump and transfer serial numbers if needed.

Report a dead link or request removal