Skip to content

MSI MS-16R51 BIOS (REV 1.0)

BIOS MS-16R51 Added: Dec 27, 2023 RAR · 6.2 MB

File details

TypeBIOS
BrandMSI
Board numberMS-16R51
Board maker (ODM)MSI
Revision1.0
DeviceLaptop
FormatRAR
Size6.2 MB
Markstested by uploader
AddedDecember 27, 2023
Updated
Original file nameMS-16R51 VER 1.0 TESTED OK.rar

Where to get the file

Opens the matching file on RM Schematics, or its source details if it is not catalogued there yet.

Alternative links

No other copies are known yet.

AwesomeHeader does not store this file. It was published in a public Telegram channel; the links above lead to the original post and its copies.

Description

From the original post:
BIOS MS-16R51 VER 1.0 TESTED OK

BIOS dump for the MSI MS-16R51 laptop, board number MS-16R51, revision 1.0, supplied as a 6.2 MB RAR archive. The uploader marked it as tested, but that is their own claim and has not been independently checked here. Technicians use a BIOS dump like this to reprogram the SPI flash chip with a programmer after corruption or a failed update. Confirm that the board number and revision on your machine match the file before flashing, and back up the original chip contents first so you can restore them if needed.

For board MS-16R51 the catalog also has 1 boardview file and 6 BIOS dumps.

Description generated from the catalog data. ·

How to open it

A BIOS dump is written to the SPI flash chip with a programmer such as the CH341A and a SOIC8 clip. Read and save the original chip contents twice before writing.

Guide: Flash a Laptop BIOS with a CH341A Programmer →

Browse more

Questions about this file

How do I flash this BIOS dump?

Write it to the SPI flash chip with a programmer such as the CH341A and a SOIC8 clip. Read and keep the original contents first, and check that the chip size matches the dump.

Will this BIOS work on my board?

Only if the board number and revision match: MSI MS-16R51. Dumps from a different board or revision can leave the board dead.

What does “clean ME” mean?

The Intel ME region in the dump has been reset, so it can be used on another board of the same model. Keep your original dump and transfer serial numbers if needed.

Report a dead link or request removal