Skip to content

MSI MS-17E71 BIOS

BIOS MS-17E71 Added: Mar 23, 2025 RAR · 7.7 MB

File details

TypeBIOS
BrandMSI
Board numberMS-17E71
Board maker (ODM)MSI
Revision1.0
DeviceLaptop
FormatRAR
Size7.7 MB
BIOS chip size16 MB
Marksincludes EC firmware
AddedMarch 23, 2025
Updated
Original file nameMS-17E71 VER1.0 16MB BIOS & EC.rar

Where to get the file

Opens the matching file on RM Schematics, or its source details if it is not catalogued there yet.

Alternative links

No other copies are known yet.

AwesomeHeader does not store this file. It was published in a public Telegram channel; the links above lead to the original post and its copies.

Description

From the original post:
MS-17E71 VER1.0 16MB BIOS & EC

BIOS dump for the MSI MS-17E71 laptop board, revision 1.0, supplied for a 16 MB flash chip and including EC/KBC firmware. The archive is a RAR file of about 7.7 MB. Technicians use a BIOS dump like this to reprogram the SPI flash with a programmer after a corrupted BIOS or a failed update, and the bundled EC/KBC firmware is relevant when the embedded controller needs restoring as well. Confirm that the board number and revision match your board before flashing, and back up the original chip contents first.

For board MS-17E71 the catalog also has 1 schematic and 1 boardview file.

Description generated from the catalog data. ·

How to open it

A BIOS dump is written to the SPI flash chip with a programmer such as the CH341A and a SOIC8 clip. Read and save the original chip contents twice before writing.

Guide: Flash a Laptop BIOS with a CH341A Programmer →

Browse more

Questions about this file

How do I flash this BIOS dump?

Write it to the SPI flash chip with a programmer such as the CH341A and a SOIC8 clip. Read and keep the original contents first, and check that the chip size matches the dump.

Will this BIOS work on my board?

Only if the board number and revision match: MSI MS-17E71. Dumps from a different board or revision can leave the board dead.

What does “clean ME” mean?

The Intel ME region in the dump has been reset, so it can be used on another board of the same model. Keep your original dump and transfer serial numbers if needed.

Report a dead link or request removal