Skip to content

MSI MS-7D22 BIOS (REV 1.2, 32 MB)

BIOS MS-7D22 Added: Aug 8, 2026 RAR · 9.3 MB

File details

TypeBIOS
BrandMSI
Board numberMS-7D22
Board maker (ODM)MSI
Revision1.2
DeviceDesktop motherboard
FormatRAR
Size9.3 MB
BIOS chip size32 MB
AddedAugust 8, 2026
Updated
Original file nameH510M BOMBER MS-7D22 VER 1.2 32MB.rar

Where to get the file

Opens the matching file on RM Schematics, or its source details if it is not catalogued there yet.

Alternative links

No other copies are known yet.

AwesomeHeader does not store this file. It was published in a public Telegram channel; the links above lead to the original post and its copies.

Description

From the original post:
H510M BOMBER MS-7D22 VER 1.2 32MB

BIOS dump for the MSI H510M BOMBER desktop motherboard, board number MS-7D22, revision 1.2, prepared for a 32 MB flash chip. Technicians use a dump like this to reprogram the SPI chip with a programmer after a corrupted BIOS or a failed update. Confirm that the board number and revision on your PCB match before flashing, and save the original chip contents first so you have a way back. The archive is a RAR file of about 9.3 MB under the original name H510M BOMBER MS-7D22 VER 1.2 32MB.rar.

For board MS-7D22 the catalog also has 1 schematic, 1 boardview file, and 1 BIOS dump.

Description generated from the catalog data. ·

How to open it

A BIOS dump is written to the SPI flash chip with a programmer such as the CH341A and a SOIC8 clip. Read and save the original chip contents twice before writing.

Guide: Flash a Laptop BIOS with a CH341A Programmer →

Browse more

Questions about this file

How do I flash this BIOS dump?

Write it to the SPI flash chip with a programmer such as the CH341A and a SOIC8 clip. Read and keep the original contents first, and check that the chip size matches the dump.

Will this BIOS work on my board?

Only if the board number and revision match: MSI MS-7D22. Dumps from a different board or revision can leave the board dead.

What does “clean ME” mean?

The Intel ME region in the dump has been reset, so it can be used on another board of the same model. Keep your original dump and transfer serial numbers if needed.

Report a dead link or request removal