Skip to content

MSI MS-N0111 BIOS

BIOS MS-N0111 Added: Jan 25, 2023 RAR · 0.7 MB

File details

TypeBIOS
BrandMSI
Board numberMS-N0111
Board maker (ODM)MSI
Revision1.0
DeviceLaptop
FormatRAR
Size0.7 MB
Markstested by uploader
AddedJanuary 25, 2023
Updated
Original file nameMS-N0111 ver 1.0 WORKING BIOS 100%.rar

Where to get the file

Opens the matching file on RM Schematics, or its source details if it is not catalogued there yet.

Alternative links

No other copies are known yet.

AwesomeHeader does not store this file. It was published in a public Telegram channel; the links above lead to the original post and its copies.

Description

From the original post:
MS-N0111 ver 1.0 WORKING BIOS 100%

BIOS dump for the MSI laptop with board number MS-N0111, revision 1.0, supplied as a RAR archive of about 0.7 MB. The uploader marked it as tested, but this is their claim and not something the catalog has verified. Technicians use a BIOS dump like this to reprogram the SPI flash chip with a programmer after BIOS corruption or a failed update. Before flashing, confirm that the board number and revision on your motherboard match MS-N0111 and 1.0, and back up the original chip contents so you can recover if something goes wrong.

For board MS-N0111 the catalog also has 1 schematic.

Description generated from the catalog data. ·

How to open it

A BIOS dump is written to the SPI flash chip with a programmer such as the CH341A and a SOIC8 clip. Read and save the original chip contents twice before writing.

Guide: Flash a Laptop BIOS with a CH341A Programmer →

Browse more

Questions about this file

How do I flash this BIOS dump?

Write it to the SPI flash chip with a programmer such as the CH341A and a SOIC8 clip. Read and keep the original contents first, and check that the chip size matches the dump.

Will this BIOS work on my board?

Only if the board number and revision match: MSI MS-N0111. Dumps from a different board or revision can leave the board dead.

What does “clean ME” mean?

The Intel ME region in the dump has been reset, so it can be used on another board of the same model. Keep your original dump and transfer serial numbers if needed.

Report a dead link or request removal