Skip to content

NM-C931 BIOS

BIOS NM-C931 Added: Jun 1, 2024 RAR · 0.1 MB

File details

TypeBIOS
Board numberNM-C931
Board maker (ODM)Compal
DeviceLaptop
FormatRAR
Size0.1 MB
Marksincludes EC firmware
AddedJune 1, 2024
Updated
Original file nameNM_C931_RV_1_0_FLACH+_EEPROM_EC_MEC1663_0x02202445_2KB_CRC32_0x010D86F0.rar

Where to get the file

Opens the matching file on RM Schematics, or its source details if it is not catalogued there yet.

Alternative links

No other copies are known yet.

AwesomeHeader does not store this file. It was published in a public Telegram channel; the links above lead to the original post and its copies.

Description

From the original post:
NM-C931 RV 1.0 FLACH+ EEPROM_EC_MEC1663_0x02202445_2KB_CRC32_0x010D86F0_MEC_Patched OK

BIOS dump for the Compal NM-C931 laptop board, revision 1.0, supplied as a RAR archive that also includes the EC/KBC firmware. Technicians use a BIOS dump like this to reprogram the SPI flash chip with a programmer after BIOS corruption or a failed update. Before writing anything, confirm that the board number and revision on your motherboard match NM-C931 RV 1.0, and save a full backup of the original chip contents. The file name lists the flash layout and checksum details, which you can use to verify the download.

The catalog also lists 2 schematics, 2 boardview files, and 5 BIOS dumps for board NM-C931.

Description generated from the catalog data. ·

How to open it

A BIOS dump is written to the SPI flash chip with a programmer such as the CH341A and a SOIC8 clip. Read and save the original chip contents twice before writing.

Guide: Flash a Laptop BIOS with a CH341A Programmer →

Browse more

Questions about this file

How do I flash this BIOS dump?

Write it to the SPI flash chip with a programmer such as the CH341A and a SOIC8 clip. Read and keep the original contents first, and check that the chip size matches the dump.

Will this BIOS work on my board?

Only if the board number and revision match: NM-C931. Dumps from a different board or revision can leave the board dead.

What does “clean ME” mean?

The Intel ME region in the dump has been reset, so it can be used on another board of the same model. Keep your original dump and transfer serial numbers if needed.

Report a dead link or request removal