Skip to content

Sony DA0HKAMB6D0 BIOS

BIOS DA0HKAMB6D0 Added: Feb 21, 2024 RAR · 2.2 MB

File details

TypeBIOS
BrandSony
Board numberDA0HKAMB6D0
Board maker (ODM)Quanta
RevisionE
DeviceLaptop
FormatRAR
Size2.2 MB
BIOS chip size8 MB
Markstested by uploader
AddedFebruary 21, 2024
Updated
Original file nameSONY DA0HKAMB6D0 BIOS REV E 8MB TESTED OK.rar

Where to get the file

Opens the matching file on RM Schematics, or its source details if it is not catalogued there yet.

Alternative links

No other copies are known yet.

AwesomeHeader does not store this file. It was published in a public Telegram channel; the links above lead to the original post and its copies.

Description

From the original post:
SONY DA0HKAMB6D0 BIOS REV E 8MB TESTED OK

BIOS dump for a Sony laptop with board number DA0HKAMB6D0, revision E, built for an 8 MB flash chip. The file is a RAR archive of about 2.2 MB, and the uploader marked it as tested, though that claim has not been checked here. Technicians use a BIOS dump like this to reprogram the SPI flash chip with a programmer after a corrupted BIOS or a failed update. Before flashing, confirm that your board number and revision match, and read out and save the original chip contents as a backup.

For board DA0HKAMB6D0 the catalog also has 1 schematic and 1 BIOS dump.

Description generated from the catalog data. ·

How to open it

A BIOS dump is written to the SPI flash chip with a programmer such as the CH341A and a SOIC8 clip. Read and save the original chip contents twice before writing.

Guide: Flash a Laptop BIOS with a CH341A Programmer →

Browse more

Questions about this file

How do I flash this BIOS dump?

Write it to the SPI flash chip with a programmer such as the CH341A and a SOIC8 clip. Read and keep the original contents first, and check that the chip size matches the dump.

Will this BIOS work on my board?

Only if the board number and revision match: Sony DA0HKAMB6D0. Dumps from a different board or revision can leave the board dead.

What does “clean ME” mean?

The Intel ME region in the dump has been reset, so it can be used on another board of the same model. Keep your original dump and transfer serial numbers if needed.

Report a dead link or request removal