Skip to content

Sony DAGD1AMB8C0 MBX-177 BIOS (REV C)

BIOS DAGD1AMB8C0 Added: Nov 22, 2022 ZIP · 0.6 MB

File details

TypeBIOS
BrandSony
Board numberDAGD1AMB8C0, MBX-177
Board maker (ODM)Quanta
RevisionC
DeviceLaptop
FormatZIP
Size0.6 MB
AddedNovember 22, 2022
Updated
Original file nameDAGD1AMB8C0 MBX-177A REV.C VGN-CR220E UMA.zip

Where to get the file

Opens the matching file on RM Schematics, or its source details if it is not catalogued there yet.

Alternative links

No other copies are known yet.

AwesomeHeader does not store this file. It was published in a public Telegram channel; the links above lead to the original post and its copies.

Description

From the original post:
DAGD1AMB8C0 MBX-177A REV.C VGN-CR220E UMA

BIOS dump for the Sony laptop board DAGD1AMB8C0 (MBX-177), revision C, made by Quanta. The original file name references the VGN-CR220E UMA variant, and the archive is ZIP format at about 0.6 MB. Technicians use a BIOS dump like this to reprogram the SPI flash chip with a programmer after a corrupted BIOS or a failed update. Before flashing, confirm that the board number and revision match your board, and back up the original chip contents so you can restore them if needed.

For board DAGD1AMB8C0 the catalog also has 3 BIOS dumps.

Description generated from the catalog data. ·

How to open it

A BIOS dump is written to the SPI flash chip with a programmer such as the CH341A and a SOIC8 clip. Read and save the original chip contents twice before writing.

Guide: Flash a Laptop BIOS with a CH341A Programmer →

Browse more

Questions about this file

How do I flash this BIOS dump?

Write it to the SPI flash chip with a programmer such as the CH341A and a SOIC8 clip. Read and keep the original contents first, and check that the chip size matches the dump.

Will this BIOS work on my board?

Only if the board number and revision match: Sony DAGD1AMB8C0 MBX-177. Dumps from a different board or revision can leave the board dead.

What does “clean ME” mean?

The Intel ME region in the dump has been reset, so it can be used on another board of the same model. Keep your original dump and transfer serial numbers if needed.

Report a dead link or request removal