Skip to content

Sony MBX-247 DA0HK1MB6E0 BIOS

BIOS MBX-247 Added: Sep 2, 2023 RAR · 2 MB

File details

TypeBIOS
BrandSony
Board numberDA0HK1MB6E0, MBX-247
Board maker (ODM)Quanta
DeviceLaptop
FormatRAR
Size2 MB
Markstested by uploader
AddedSeptember 2, 2023
Updated
Original file nameSONY MBX-247 VPCEH DA0HK1MB6E0 MODEL HK1 TESTED BIOS OK.rar

Where to get the file

Opens the matching file on RM Schematics, or its source details if it is not catalogued there yet.

Alternative links

No other copies are known yet.

AwesomeHeader does not store this file. It was published in a public Telegram channel; the links above lead to the original post and its copies.

Description

From the original post:
SONY MBX-247 VPCEH DA0HK1MB6E0 MODEL HK1 TESTED BIOS OK

BIOS dump for a Sony laptop, board numbers DA0HK1MB6E0 and MBX-247, built by Quanta. The uploader marked it as tested, but that is their own note and has not been independently verified. The archive is a RAR file of about 2 MB. A BIOS dump is used to reprogram the SPI flash chip with a programmer after BIOS corruption or a failed update. Before flashing, confirm that the board number and revision on your motherboard match the file, and back up the original chip contents first.

The catalog also lists 6 BIOS dumps for board DA0HK1MB6E0.

Description generated from the catalog data. ·

How to open it

A BIOS dump is written to the SPI flash chip with a programmer such as the CH341A and a SOIC8 clip. Read and save the original chip contents twice before writing.

Guide: Flash a Laptop BIOS with a CH341A Programmer →

Browse more

Questions about this file

How do I flash this BIOS dump?

Write it to the SPI flash chip with a programmer such as the CH341A and a SOIC8 clip. Read and keep the original contents first, and check that the chip size matches the dump.

Will this BIOS work on my board?

Only if the board number and revision match: Sony MBX-247 DA0HK1MB6E0. Dumps from a different board or revision can leave the board dead.

What does “clean ME” mean?

The Intel ME region in the dump has been reset, so it can be used on another board of the same model. Keep your original dump and transfer serial numbers if needed.

Report a dead link or request removal