TD-W8901G V3 100901 BIOS
File details
| Type | BIOS |
|---|---|
| Format | ZIP |
| Size | 1 MB |
| Added | June 7, 2020 |
| Updated | |
| Original file name | TD-W8901G_V3_100901.zip |
Where to get the file
Opens the matching file on RM Schematics, or its source details if it is not catalogued there yet.
Alternative links
No other copies are known yet.
Description
BIOS dump supplied as a ZIP archive named TD-W8901G_V3_100901.zip, about 1.0 MB in size. The available details do not list a brand, board number or revision, so confirm which device the dump was taken from before you use it. Technicians typically use a BIOS dump to reprogram the SPI flash chip with a programmer after a corrupted BIOS or a failed update. Back up the original chip contents first, and make sure the target board matches the dump before writing anything to it.
Description generated from the catalog data. ·
Questions about this file
How do I flash this BIOS dump?
Write it to the SPI flash chip with a programmer such as the CH341A and a SOIC8 clip. Read and keep the original contents first, and check that the chip size matches the dump.
Will this BIOS work on my board?
Only if the board number and revision match: TD-W8901G V3 100901. Dumps from a different board or revision can leave the board dead.
What does “clean ME” mean?
The Intel ME region in the dump has been reset, so it can be used on another board of the same model. Keep your original dump and transfer serial numbers if needed.