Skip to content

Toshiba DATE1MMB8E0 BIOS (REV E, 2 MB)

BIOS DATE1MMB8E0 Added: Dec 21, 2024 RAR · 3.6 MB

File details

TypeBIOS
BrandToshiba
Board numberDATE1MMB8E0
Board maker (ODM)Quanta
RevisionE
DeviceLaptop
FormatRAR
Size3.6 MB
BIOS chip size2 MB
Markstested by uploader
AddedDecember 21, 2024
Updated
Original file nameTOSHIBA DATE1MMB8E0 REV E 2MB WORKING BIOS 100%.rar

Where to get the file

Opens the matching file on RM Schematics, or its source details if it is not catalogued there yet.

Alternative links

No other copies are known yet.

AwesomeHeader does not store this file. It was published in a public Telegram channel; the links above lead to the original post and its copies.

Description

From the original post:
TOSHIBA DATE1MMB8E0 REV E 2MB WORKING BIOS 100%

BIOS dump for a Toshiba laptop on board DATE1MMB8E0 (Quanta ODM), revision E, with a 2 MB flash chip. The uploader marks it as tested. Technicians use a dump like this to reprogram the SPI chip with a programmer after a corrupted BIOS or a failed update. Before flashing, confirm that the board number and revision match your board, and save the original chip contents as a backup first. The file is a RAR archive of about 3.6 MB.

The catalog also lists 3 BIOS dumps for board DATE1MMB8E0.

Description generated from the catalog data. ·

How to open it

A BIOS dump is written to the SPI flash chip with a programmer such as the CH341A and a SOIC8 clip. Read and save the original chip contents twice before writing.

Guide: Flash a Laptop BIOS with a CH341A Programmer →

Browse more

Questions about this file

How do I flash this BIOS dump?

Write it to the SPI flash chip with a programmer such as the CH341A and a SOIC8 clip. Read and keep the original contents first, and check that the chip size matches the dump.

Will this BIOS work on my board?

Only if the board number and revision match: Toshiba DATE1MMB8E0. Dumps from a different board or revision can leave the board dead.

What does “clean ME” mean?

The Intel ME region in the dump has been reset, so it can be used on another board of the same model. Keep your original dump and transfer serial numbers if needed.

Report a dead link or request removal