Skip to content

Toshiba L50-A 6050A2556201 BIOS

BIOS 6050A2556201 Added: Dec 10, 2018 RAR · 3.1 MB

File details

TypeBIOS
BrandToshiba
ModelL50-A
Board number6050A2556201
Board maker (ODM)Inventec
DeviceLaptop
FormatRAR
Size3.1 MB
AddedDecember 10, 2018
Updated
Original file nameCR10SG_6050A2556201 TOSHIBA L50-A.rar

Where to get the file

Opens the matching file on RM Schematics, or its source details if it is not catalogued there yet.

Alternative links

No other copies are known yet.

AwesomeHeader does not store this file. It was published in a public Telegram channel; the links above lead to the original post and its copies.

Description

BIOS dump for the Toshiba L50-A laptop, board number 6050A2556201, from the Inventec design. The archive is a RAR file of about 3.1 MB, shared under the original name CR10SG_6050A2556201 TOSHIBA L50-A.rar. Technicians use a BIOS dump like this to reprogram the SPI flash chip with a programmer after a corrupted BIOS or a failed update. Before writing anything, confirm that the board number on your motherboard matches 6050A2556201, and back up the original chip contents so you can recover if the flash goes wrong.

The catalog also lists 1 schematic, 1 boardview file, and 2 BIOS dumps for board 6050A2556201.

Description generated from the catalog data. ·

How to open it

A BIOS dump is written to the SPI flash chip with a programmer such as the CH341A and a SOIC8 clip. Read and save the original chip contents twice before writing.

Guide: Flash a Laptop BIOS with a CH341A Programmer →

Browse more

Questions about this file

How do I flash this BIOS dump?

Write it to the SPI flash chip with a programmer such as the CH341A and a SOIC8 clip. Read and keep the original contents first, and check that the chip size matches the dump.

Will this BIOS work on my board?

Only if the board number and revision match: Toshiba L50-A 6050A2556201. Dumps from a different board or revision can leave the board dead.

What does “clean ME” mean?

The Intel ME region in the dump has been reset, so it can be used on another board of the same model. Keep your original dump and transfer serial numbers if needed.

Report a dead link or request removal