Skip to content

Toshiba Satellite C70D-A DA0BD9MB8F0 BIOS

BIOS DA0BD9MB8F0 Added: Apr 22, 2019 RAR · 1.8 MB

File details

TypeBIOS
BrandToshiba
ModelSatellite C70D-A
Board numberDA0BD9MB8F0
Board maker (ODM)Quanta
RevisionF
DeviceLaptop
FormatRAR
Size1.8 MB
AddedApril 22, 2019
Updated
Original file nameToshiba Satellite C70D-A, C75D-A DA0BD9MB8F0 rev f.rar

Where to get the file

Opens the matching file on RM Schematics, or its source details if it is not catalogued there yet.

Alternative links

No other copies are known yet.

AwesomeHeader does not store this file. It was published in a public Telegram channel; the links above lead to the original post and its copies.

Description

BIOS dump for the Toshiba Satellite C70D-A laptop, board number DA0BD9MB8F0, revision F, from the Quanta design. The archive is a RAR file of about 1.8 MB, and the original file name also references the C75D-A. A technician uses a dump like this to reprogram the SPI flash chip with a programmer after a corrupted BIOS or a failed update. Before writing anything, confirm that the board number and revision printed on your motherboard match rev F, and back up the chip's original contents so you can recover if needed.

For board DA0BD9MB8F0 the catalog also has 1 BIOS dump.

Description generated from the catalog data. ·

How to open it

A BIOS dump is written to the SPI flash chip with a programmer such as the CH341A and a SOIC8 clip. Read and save the original chip contents twice before writing.

Guide: Flash a Laptop BIOS with a CH341A Programmer →

Browse more

Questions about this file

How do I flash this BIOS dump?

Write it to the SPI flash chip with a programmer such as the CH341A and a SOIC8 clip. Read and keep the original contents first, and check that the chip size matches the dump.

Will this BIOS work on my board?

Only if the board number and revision match: Toshiba Satellite C70D-A DA0BD9MB8F0. Dumps from a different board or revision can leave the board dead.

What does “clean ME” mean?

The Intel ME region in the dump has been reset, so it can be used on another board of the same model. Keep your original dump and transfer serial numbers if needed.

Report a dead link or request removal