Skip to content

Toshiba Satellite L50 DABLIDMB8E0 BIOS

BIOS DABLIDMB8E0 Added: Mar 8, 2021 RAR · 3.8 MB

File details

TypeBIOS
BrandToshiba
ModelSatellite L50
Board numberDABLIDMB8E0
Board maker (ODM)Quanta
DeviceLaptop
FormatRAR
Size3.8 MB
AddedMarch 8, 2021
Updated
Original file nameTOSHIBA_SATELLITE_L50_DABLIDMB8E0.rar

Where to get the file

Opens the matching file on RM Schematics, or its source details if it is not catalogued there yet.

Alternative links

No other copies are known yet.

AwesomeHeader does not store this file. It was published in a public Telegram channel; the links above lead to the original post and its copies.

Description

BIOS dump for the Toshiba Satellite L50 laptop, board number DABLIDMB8E0, a Quanta design, supplied as a RAR archive of about 3.8 MB. Technicians use a dump like this to reprogram the SPI flash chip with a programmer when the BIOS has become corrupted or a firmware update has failed. Before flashing, confirm that the board number on your motherboard matches DABLIDMB8E0 and that the revision is the same, and save a backup of the original chip contents first so you can recover if the write goes wrong.

For board DABLIDMB8E0 the catalog also has 4 schematics and 12 BIOS dumps.

Description generated from the catalog data. ·

How to open it

A BIOS dump is written to the SPI flash chip with a programmer such as the CH341A and a SOIC8 clip. Read and save the original chip contents twice before writing.

Guide: Flash a Laptop BIOS with a CH341A Programmer →

Browse more

Questions about this file

How do I flash this BIOS dump?

Write it to the SPI flash chip with a programmer such as the CH341A and a SOIC8 clip. Read and keep the original contents first, and check that the chip size matches the dump.

Will this BIOS work on my board?

Only if the board number and revision match: Toshiba Satellite L50 DABLIDMB8E0. Dumps from a different board or revision can leave the board dead.

What does “clean ME” mean?

The Intel ME region in the dump has been reset, so it can be used on another board of the same model. Keep your original dump and transfer serial numbers if needed.

Report a dead link or request removal