TP-LINK-TD-W8901G VER 3.3 2MB OKOK BIOS
File details
| Type | BIOS |
|---|---|
| Revision | 3.3 |
| Format | RAR |
| Size | 1.6 MB |
| BIOS chip size | 2 MB |
| Added | July 26, 2025 |
| Updated | |
| Original file name | TP-LINK-TD-W8901G VER 3.3 2MB OKOK.rar |
Where to get the file
Opens the matching file on RM Schematics, or its source details if it is not catalogued there yet.
Alternative links
No other copies are known yet.
Description
TP-LINK-TD-W8901G VER 3.3 2MB BIOS dump for the TP-LINK TD-W8901G, revision (ver) 3.3, prepared for a 2 MB flash chip and supplied as a RAR archive of about 1.6 MB. Note that this is a router firmware image rather than a laptop or motherboard BIOS, so it applies only to the TD-W8901G, and the revision marking should match your device before you flash anything. Technicians working with a dump like this typically use a programmer to write the SPI flash after corruption or a failed update. Back up the original chip contents first, and confirm the chip size is 2 MB.
Description generated from the catalog data. ·
Questions about this file
How do I flash this BIOS dump?
Write it to the SPI flash chip with a programmer such as the CH341A and a SOIC8 clip. Read and keep the original contents first, and check that the chip size matches the dump.
Will this BIOS work on my board?
Only if the board number and revision match: TP-LINK-TD-W8901G VER 3.3 2MB OKOK. Dumps from a different board or revision can leave the board dead.
What does “clean ME” mean?
The Intel ME region in the dump has been reset, so it can be used on another board of the same model. Keep your original dump and transfer serial numbers if needed.