TP-LINK TD-W8901G VER3.0-25X16AVS BIOS
File details
| Type | BIOS |
|---|---|
| Revision | 3.0 |
| Format | RAR |
| Size | 1.1 MB |
| BIOS chip size | 2 MB |
| Marks | tested by uploader |
| Added | November 16, 2020 |
| Updated | |
| Original file name | TP-LINK TD-W8901G VER3.0-25X16AVS.rar |
Where to get the file
Opens the matching file on RM Schematics, or its source details if it is not catalogued there yet.
Alternative links
No other copies are known yet.
Description
This is a BIOS dump for a TP-LINK TD-W8901G router, revision 3.0, supplied as a RAR archive of about 1.1 MB. It is built for a 2 MB flash chip and was marked as tested by the uploader. Technicians use a dump like this to reprogram the SPI flash with a programmer after firmware corruption or a failed update. The facts here do not give a board number, so confirm that the hardware revision on your device matches version 3.0 before flashing. Back up the existing chip contents first so you can restore them if needed.
Description generated from the catalog data. ·
Questions about this file
How do I flash this BIOS dump?
Write it to the SPI flash chip with a programmer such as the CH341A and a SOIC8 clip. Read and keep the original contents first, and check that the chip size matches the dump.
Will this BIOS work on my board?
Only if the board number and revision match: TP-LINK TD-W8901G VER3.0-25X16AVS. Dumps from a different board or revision can leave the board dead.
What does “clean ME” mean?
The Intel ME region in the dump has been reset, so it can be used on another board of the same model. Keep your original dump and transfer serial numbers if needed.