TP LINK TD W8901N Ver 2 0 RALINK RT63365E 100% BIOS
File details
| Type | BIOS |
|---|---|
| Revision | 2.0 |
| Format | RAR |
| Size | 1.4 MB |
| Marks | tested by uploader |
| Added | May 15, 2023 |
| Updated | |
| Original file name | TP_LINK_TD_W8901N_Ver_2_0_RALINK_RT63365E_TESTED_OK_WORKING_100%.rar |
Where to get the file
Opens the matching file on RM Schematics, or its source details if it is not catalogued there yet.
Alternative links
No other copies are known yet.
Description
TP-LINK TD-W8901N Ver 2.0 RALINK RT63365E TESTED OK WORKING 100% This is a BIOS dump for a TP-Link TD-W8901N router, hardware revision 2.0, with a Ralink RT63365E chip named in the file name. The uploader marked it as tested, but that is their claim and has not been verified here. The archive is a RAR file of about 1.4 MB. A BIOS dump like this is used to reprogram the SPI flash chip with a programmer after corruption or a failed firmware update. Before writing anything, confirm that the hardware version on your device is 2.0, and back up the original chip contents first.
Description generated from the catalog data. ·
Questions about this file
How do I flash this BIOS dump?
Write it to the SPI flash chip with a programmer such as the CH341A and a SOIC8 clip. Read and keep the original contents first, and check that the chip size matches the dump.
Will this BIOS work on my board?
Only if the board number and revision match: TP LINK TD W8901N Ver 2 0 RALINK RT63365E 100%. Dumps from a different board or revision can leave the board dead.
What does “clean ME” mean?
The Intel ME region in the dump has been reset, so it can be used on another board of the same model. Keep your original dump and transfer serial numbers if needed.