Skip to content

X555LD REV 3.3 SR23Y NVIDIA N15V-GM-S-A2 CLR ME BIOS

BIOS Added: Nov 15, 2021 RAR · 3.3 MB

File details

TypeBIOS
Revision3.3
FormatRAR
Size3.3 MB
Marksclean ME
AddedNovember 15, 2021
Updated
Original file nameBIOS X555LD REV 3.3 SR23Y NVIDIA N15V-GM-S-A2 CLR ME.rar

Where to get the file

Opens the matching file on RM Schematics, or its source details if it is not catalogued there yet.

Alternative links

No other copies are known yet.

AwesomeHeader does not store this file. It was published in a public Telegram channel; the links above lead to the original post and its copies.

Description

BIOS dump, revision 3.3, with the Intel ME region cleaned, supplied as a RAR archive of about 3.3 MB. The original file name points to an ASUS X555LD board, but the facts here do not confirm the brand, model or board number, so check the file name and your board's markings yet before flashing. Technicians use a BIOS dump like this to reprogram the SPI flash chip with a programmer after a corrupted BIOS or a failed update. Match the revision on your board to 3.3, and back up the original chip contents before writing anything.

Description generated from the catalog data. ·

How to open it

A BIOS dump is written to the SPI flash chip with a programmer such as the CH341A and a SOIC8 clip. Read and save the original chip contents twice before writing.

Guide: Flash a Laptop BIOS with a CH341A Programmer →

Questions about this file

How do I flash this BIOS dump?

Write it to the SPI flash chip with a programmer such as the CH341A and a SOIC8 clip. Read and keep the original contents first, and check that the chip size matches the dump.

Will this BIOS work on my board?

Only if the board number and revision match: X555LD REV 3.3 SR23Y NVIDIA N15V-GM-S-A2 CLR ME. Dumps from a different board or revision can leave the board dead.

What does “clean ME” mean?

The Intel ME region in the dump has been reset, so it can be used on another board of the same model. Keep your original dump and transfer serial numbers if needed.

Report a dead link or request removal