Skip to content

Dell Inspiron DG15 BIOS

BIOS Added: Feb 26, 2025 7Z · 2.1 MB

File details

TypeBIOS
BrandDell
ModelInspiron DG15
DeviceLaptop
Format7Z
Size2.1 MB
Markstested by uploader
AddedFebruary 26, 2025
Updated
Original file nameDell_Inspiron_N5010_DG15_MB_48_4HH01_011_Ati_Discrete_Tested_OK.7z

Where to get the file

Opens the matching file on RM Schematics, or its source details if it is not catalogued there yet.

Alternative links

No other copies are known yet.

AwesomeHeader does not store this file. It was published in a public Telegram channel; the links above lead to the original post and its copies.

Description

From the original post:
Dell Inspiron N5010 - DG15 MB 48.4HH01.011 Ati Discrete Tested OK

BIOS dump for the Dell Inspiron N5010 laptop, listed as DG15 MB 48.4HH01.011 with an ATI discrete graphics variant. The uploader marks it as tested, but that is their own note and not a verification. Technicians use a BIOS dump like this to reprogram the SPI flash chip with a programmer after corruption or a failed update. Before writing anything, confirm that the board number and revision on your own board match, and back up the original chip contents first. The archive is a 7Z file of about 2.1 MB.

The catalog also lists 1 boardview file for the Dell Inspiron DG15.

Description generated from the catalog data. ·

How to open it

A BIOS dump is written to the SPI flash chip with a programmer such as the CH341A and a SOIC8 clip. Read and save the original chip contents twice before writing.

Guide: Flash a Laptop BIOS with a CH341A Programmer →

Browse more

Questions about this file

How do I flash this BIOS dump?

Write it to the SPI flash chip with a programmer such as the CH341A and a SOIC8 clip. Read and keep the original contents first, and check that the chip size matches the dump.

Will this BIOS work on my board?

Only if the board number and revision match: Dell Inspiron DG15. Dumps from a different board or revision can leave the board dead.

What does “clean ME” mean?

The Intel ME region in the dump has been reset, so it can be used on another board of the same model. Keep your original dump and transfer serial numbers if needed.

Report a dead link or request removal