Skip to content

eMachines G640 JE70-DN 09929-1 BIOS

BIOS 09929-1 Added: Jan 21, 2023 ZIP · 0.9 MB

File details

TypeBIOS
BrandeMachines
ModelG640
Board number09929-1
PlatformJE70-DN
Board maker (ODM)Wistron
DeviceLaptop
FormatZIP
Size0.9 MB
AddedJanuary 21, 2023
Updated
Original file nameEMACHINES G640 JE70-DN MB 09929-1.zip

Where to get the file

Opens the matching file on RM Schematics, or its source details if it is not catalogued there yet.

Alternative links

No other copies are known yet.

AwesomeHeader does not store this file. It was published in a public Telegram channel; the links above lead to the original post and its copies.

Description

From the original post:
EMACHINES G640 JE70-DN MB 09929-1

BIOS dump for the eMachines G640 laptop, board number 09929-1, platform JE70-DN, with Wistron listed as the ODM. The file is a ZIP archive of about 0.9 MB. Technicians use a BIOS dump like this to reprogram the SPI flash chip with a programmer after a corrupted BIOS or a failed update. Before flashing, confirm that the board number and revision on your motherboard match the file, and back up the original chip contents so you can recover if the write goes wrong.

For board 09929-1 the catalog also has 1 schematic, 1 boardview file, and 3 BIOS dumps.

Description generated from the catalog data. ·

How to open it

A BIOS dump is written to the SPI flash chip with a programmer such as the CH341A and a SOIC8 clip. Read and save the original chip contents twice before writing.

Guide: Flash a Laptop BIOS with a CH341A Programmer →

Browse more

Questions about this file

How do I flash this BIOS dump?

Write it to the SPI flash chip with a programmer such as the CH341A and a SOIC8 clip. Read and keep the original contents first, and check that the chip size matches the dump.

Will this BIOS work on my board?

Only if the board number and revision match: eMachines G640 JE70-DN 09929-1. Dumps from a different board or revision can leave the board dead.

What does “clean ME” mean?

The Intel ME region in the dump has been reset, so it can be used on another board of the same model. Keep your original dump and transfer serial numbers if needed.

Report a dead link or request removal