Skip to content

Toshiba PT10ABX(PT10ABXPT10ABXG) MAIN BOARD REV 2.1 BIOS

BIOS Added: Dec 24, 2018 RAR · 1.7 MB

File details

TypeBIOS
BrandToshiba
Revision2.1
DeviceLaptop
FormatRAR
Size1.7 MB
AddedDecember 24, 2018
Updated
Original file namePT10ABX(PT10ABXPT10ABXG) MAIN BOARD REV 2.1.rar

Where to get the file

Opens the matching file on RM Schematics, or its source details if it is not catalogued there yet.

Alternative links

No other copies are known yet.

AwesomeHeader does not store this file. It was published in a public Telegram channel; the links above lead to the original post and its copies.

Description

From the original post:
TOSHIBA Satellite C50D-A164 PSCHQV PT10ABX(PT10ABX/PT10ABXG) MAIN BOARD REV 2.1

BIOS dump for a Toshiba laptop, main board revision 2.1, supplied as a RAR archive of about 1.7 MB. The file name references the PT10ABX and PT10ABXG main board, and the post names the Toshiba Satellite C50D-A164 model, so match the board number and revision on your motherboard before using it. A BIOS dump is used to reprogram the SPI flash chip with a programmer after BIOS corruption or a failed update. Read and save the original chip contents first, so you can restore them if the new write does not behave as expected.

Description generated from the catalog data. ·

How to open it

A BIOS dump is written to the SPI flash chip with a programmer such as the CH341A and a SOIC8 clip. Read and save the original chip contents twice before writing.

Guide: Flash a Laptop BIOS with a CH341A Programmer →

Browse more

Questions about this file

How do I flash this BIOS dump?

Write it to the SPI flash chip with a programmer such as the CH341A and a SOIC8 clip. Read and keep the original contents first, and check that the chip size matches the dump.

Will this BIOS work on my board?

Only if the board number and revision match: Toshiba PT10ABX(PT10ABXPT10ABXG) MAIN BOARD REV 2.1. Dumps from a different board or revision can leave the board dead.

What does “clean ME” mean?

The Intel ME region in the dump has been reset, so it can be used on another board of the same model. Keep your original dump and transfer serial numbers if needed.

Report a dead link or request removal