Skip to content

Lenovo DA0LV6MB6F0 BIOS (REV F, 16 MB)

BIOS DA0LV6MB6F0 Added: Jan 17, 2022 RAR · 4.4 MB

File details

TypeBIOS
BrandLenovo
Board numberDA0LV6MB6F0
Board maker (ODM)Quanta
RevisionF
DeviceLaptop
FormatRAR
Size4.4 MB
BIOS chip size16 MB
AddedJanuary 17, 2022
Updated
Original file nameLENOVO DA0LV6MB6F0 REV F 16MB BIOS.rar

Where to get the file

Opens the matching file on RM Schematics, or its source details if it is not catalogued there yet.

Alternative links

No other copies are known yet.

AwesomeHeader does not store this file. It was published in a public Telegram channel; the links above lead to the original post and its copies.

Description

BIOS dump for the Lenovo laptop board DA0LV6MB6F0, Quanta design, revision F, sized for a 16 MB flash chip. The archive is a RAR file of about 4.4 MB, named LENOVO DA0LV6MB6F0 REV F 16MB BIOS.rar. Technicians use a dump like this to reprogram the SPI chip with a programmer after a corrupted BIOS or a failed update. Before flashing, confirm that the board number and revision printed on your motherboard match DA0LV6MB6F0 and F, and save a backup of the original chip contents first.

For board DA0LV6MB6F0 the catalog also has 1 schematic, 1 boardview file, and 9 BIOS dumps.

Description generated from the catalog data. ·

How to open it

A BIOS dump is written to the SPI flash chip with a programmer such as the CH341A and a SOIC8 clip. Read and save the original chip contents twice before writing.

Guide: Flash a Laptop BIOS with a CH341A Programmer →

Browse more

Questions about this file

How do I flash this BIOS dump?

Write it to the SPI flash chip with a programmer such as the CH341A and a SOIC8 clip. Read and keep the original contents first, and check that the chip size matches the dump.

Will this BIOS work on my board?

Only if the board number and revision match: Lenovo DA0LV6MB6F0. Dumps from a different board or revision can leave the board dead.

What does “clean ME” mean?

The Intel ME region in the dump has been reset, so it can be used on another board of the same model. Keep your original dump and transfer serial numbers if needed.

Report a dead link or request removal