Skip to content

Lenovo V310-14ISK LV6 DA0LV6MB6F0 BIOS

BIOS DA0LV6MB6F0 Added: Oct 29, 2017 ZIP · 3 MB

File details

TypeBIOS
BrandLenovo
ModelV310-14ISK
Board numberDA0LV6MB6F0
PlatformLV6
Board maker (ODM)Quanta
RevisionF
DeviceLaptop
FormatZIP
Size3 MB
AddedOctober 29, 2017
Updated
Original file nameLenovo_V310-14ISK_V310-15ISK=8=Quanta_LV6_DA0LV6MB6F0_Rev-F.zip

Where to get the file

Opens the matching file on RM Schematics, or its source details if it is not catalogued there yet.

Alternative links

No other copies are known yet.

AwesomeHeader does not store this file. It was published in a public Telegram channel; the links above lead to the original post and its copies.

Description

BIOS dump for the Lenovo V310-14ISK laptop, Quanta board DA0LV6MB6F0 (platform LV6), revision F, supplied as a ZIP of about 3.0 MB. Technicians use a dump like this to reprogram the SPI flash chip with a programmer after a corrupted BIOS or a failed update. Confirm that the board number and revision on your motherboard match before flashing, and back up the original chip contents first. The original file name also references the V310-15ISK, so check the model against your own unit.

The catalog also lists 1 schematic, 1 boardview file, and 9 BIOS dumps for board DA0LV6MB6F0.

Description generated from the catalog data. ·

How to open it

A BIOS dump is written to the SPI flash chip with a programmer such as the CH341A and a SOIC8 clip. Read and save the original chip contents twice before writing.

Guide: Flash a Laptop BIOS with a CH341A Programmer →

Browse more

Questions about this file

How do I flash this BIOS dump?

Write it to the SPI flash chip with a programmer such as the CH341A and a SOIC8 clip. Read and keep the original contents first, and check that the chip size matches the dump.

Will this BIOS work on my board?

Only if the board number and revision match: Lenovo V310-14ISK LV6 DA0LV6MB6F0. Dumps from a different board or revision can leave the board dead.

What does “clean ME” mean?

The Intel ME region in the dump has been reset, so it can be used on another board of the same model. Keep your original dump and transfer serial numbers if needed.

Report a dead link or request removal