Skip to content

Lenovo V310-14ISK DA0LV6MB6F0 BIOS (clean ME)

BIOS DA0LV6MB6F0 Added: Aug 15, 2018 ZIP · 4.3 MB

File details

TypeBIOS
BrandLenovo
ModelV310-14ISK
Board numberDA0LV6MB6F0
Board maker (ODM)Quanta
DeviceLaptop
FormatZIP
Size4.3 MB
Marksclean ME, tested by uploader
AddedAugust 15, 2018
Updated
Original file nameLenovo V310-14ISK, V310-15ISK DA0LV6MB6F0 Clear me tested ok.zip

Where to get the file

Opens the matching file on RM Schematics, or its source details if it is not catalogued there yet.

Alternative links

No other copies are known yet.

AwesomeHeader does not store this file. It was published in a public Telegram channel; the links above lead to the original post and its copies.

Description

BIOS dump for the Lenovo V310-14ISK laptop, board number DA0LV6MB6F0 from Quanta, packaged as a 4.3 MB ZIP. The uploader marked it as tested and the Intel ME region has been cleaned. Technicians use a dump like this to reprogram the SPI flash chip with a programmer after a corrupted BIOS or a failed update. The original file name also mentions the V310-15ISK, so confirm the board number and revision on your own board match before flashing.

For board DA0LV6MB6F0 the catalog also has 1 schematic, 1 boardview file, and 9 BIOS dumps.

Description generated from the catalog data. ·

How to open it

A BIOS dump is written to the SPI flash chip with a programmer such as the CH341A and a SOIC8 clip. Read and save the original chip contents twice before writing.

Guide: Flash a Laptop BIOS with a CH341A Programmer →

Browse more

Questions about this file

How do I flash this BIOS dump?

Write it to the SPI flash chip with a programmer such as the CH341A and a SOIC8 clip. Read and keep the original contents first, and check that the chip size matches the dump.

Will this BIOS work on my board?

Only if the board number and revision match: Lenovo V310-14ISK DA0LV6MB6F0. Dumps from a different board or revision can leave the board dead.

What does “clean ME” mean?

The Intel ME region in the dump has been reset, so it can be used on another board of the same model. Keep your original dump and transfer serial numbers if needed.

Report a dead link or request removal